| Cantidad: | |
|---|---|
24070
YIXUN mold
8480419090
| Parameter | Specification |
|---|---|
| Mold Configuration | 1×1 single-cavity design |
| Runner System | Hot runner injection, eliminating cold runner waste and reducing cycle time |
| Molding Material | HIPS (High Impact Polystyrene) |
| Cavity & Core Steel | 1.2344 (H13) hot work tool steel |
| Hardness | HRC 48–52 (vacuum heat-treated) |
| Surface Finish | Fine polishing on both cavity and core for smooth demolding and clean surfaces |
| Application | Plastic filter parts, vent covers, grid panels, and industrial filter components |
Balanced flow across the entire mold, preventing short shots in fine grid details.
Consistent pressure and cooling, eliminating warpage in the large flat panel.
Tight dimensional control, critical for filter parts that require precise hole alignment and spacing.
No cold runner waste, reducing material cost and scrap rates.
Reduced cycle time, as the mold does not need to cool a large cold runner system.
Consistent melt temperature, preventing HIPS degradation or discoloration during long runs.
High hardness (HRC48-52) delivers excellent wear resistance, even with abrasive fillers or repetitive molding cycles.
Superior thermal stability, resisting heat checking and deformation at high molding temperatures.
Excellent toughness, ideal for withstanding repeated mechanical stress from the mold opening/closing cycle.
Smooth surfaces prevent sticking or dragging on the intricate grid structure during ejection.
Reduced friction minimizes the risk of scratches or flash on the delicate edges of filter holes.
Easy mold cleaning and maintenance, critical for preventing contamination in filter applications.
The rigid, impact-resistant HIPS material is ideal for filter housings, vent panels, and other components requiring structural strength.
The mold design prevents sink marks and warpage common in large, flat HIPS parts.
The hot runner and fine polish ensure clean, defect-free parts with no flow lines or blemishes.
